Smart Metering
Read every meter remotely, for the life of the meter.Low-power connectivity that reaches basements and pits.
The meter is in the hardest place to reach
Signal where it is weakest
Meters live in basements, cupboards, cellars and underground pits. Ordinary coverage does not reach them, and a meter that cannot be read is a manual visit and an estimated bill.
Batteries that must last a decade
Gas and water meters are sealed and battery-powered for ten to fifteen years. Every transmission and every failed connection eats into a lifespan that has to survive without a site visit.
Millions of endpoints
A metering rollout is not thousands of devices but millions, each needing to be provisioned, monitored and billed with no manual handling per unit.
Meters outlive networks
A meter installed today must still report after 2G and 3G are switched off. Connectivity chosen now has to survive network sunsets across a fifteen-year life.
Coverage that reaches the meter and lasts its lifetime
NB-IoT for deep indoors
Narrowband IoT is built for exactly this: a large link-budget advantage over standard 4G that pushes signal into basements and pits, on the tiny payloads a meter reading needs.
PSM and eDRX for a decade of battery
Power Saving Mode lets a meter stay registered while it sleeps between reads, waking briefly to report, so a single battery stretches across the meter life.
The strongest signal at every meter
A multi-network profile attaches to the best of 718 networks at each location, so an estate is not held hostage to one operator's map.
eUICC to outlast sunsets
Remote profile management (eUICC) means a fielded meter can be re-homed over the air as networks change, protecting a fifteen-year deployment without a truck roll.
Secure metering data
Fixed IP, IPsec/VPN and selective routing carry DLMS/COSEM meter data on a private path to the head-end, off the public internet.
Provision millions by API
Activate, suspend and monitor an estate of millions programmatically, with live diagnostics to find a non-reporting meter without a visit.
Across every utility
Electricity metering (AMI)
Interval reads, outage and power-quality data from residential and commercial meters.
Gas metering
Battery-powered, deep-indoor gas meters reporting for a decade on narrowband.
Water metering & leak
Consumption and leak alerts from meters in pits, chambers and basements.
District heating
Heat and flow metering across networked residential and commercial sites.
Sub-metering
Tenant and common-area sub-metering across multi-occupancy buildings.
Prepayment & grid-edge
Prepay meters and grid-edge sensors on the same low-power fabric.
One network and one platform behind every device
IoT SIMs
Card, embedded chip or software SIM, commercial or industrial grade, with the full technical specification.
IoT eSIM & SGP.32
Choose the operator after the device ships, and change it over the air for the life of the device.
Fleet management
Your SIMs, their status and network logs in the VoicePro portal, with data limits, alerts, an API and webhooks.
Network diagnostics
Attach logs, signalling logs and live packet capture. Find out why a device went quiet without visiting it.
Security & private networking
IMEI lock, device isolation, IPsec and OpenVPN. Keep devices off the public internet.
Coverage explorer
Every network in 203 countries, with 2G, 3G, LTE, LTE-M and NB-IoT status by operator.
Read your estate remotely, for its lifetime
Tell us your meter types and sites. We will confirm NB-IoT and LTE-M coverage and validate networks on request.